[5kV AC/6kV DC] Hipot and Insulation Resistance Tester, Rise/Fall-Time Control Function Equipped
[5kV AC] Hipot Tester, Rise/Fall-Time Control Function Equipped
[10kV AC/DC] Hipot Tester
[3kV AC] Hipot Tester for simplified test
[5kV AC/6kV DC] Hipot and Insulation Resistance Tester, Rise/Fall-Time Control Function Equipped : 4 Models
[10kV DC] Hipot and Insulation Resistance Tester for PV Module
The TOS9213AS, DC Withstanding Voltage/Insulation Resistance Tester, is the test instrument that can handle the insuration test with high voltage and high resolution required for the evaluation of the PV module, Cable, Connector, and Junction Box. The TOS9213AS is equipped with functions of the DC withstanding voltage testing and the insulation resistance testing accompanied with the features and performance of Kikusui’s high-end model TOS9200 series, and it extends additional features and specifications exclusively applied to the PV module testing. Furthermore, the TOS9213AS improves the current measurement accuracy of the DC withstanding voltage testing from the original speciﬁcation of the TOS9000 series.
Insulation Resistance Tester
The TOS7200 is an insulation resistance tester available for a wide range of various electric and electronic components, as well as electric and electronic equipment. Output voltage can be optionally set in the range of -25 to -1000 Vdc with a resolution of 1 V. As it is fitted with a window comparator and timer function, the tester is capable of efficiently conducting insulation resistance tests based on various safety standards. In addition, this product is equipped with panel memory as standard feature, which can be recalled by remote control, SIGNAL I/O connector, and the RS-232C interface for easy automatic testing system construction.
The PID insulation tester (TOS7210S) is designed based on the insulation resistance tester (TOS7200) to carry out the evaluation of the PID (Potential Induced Degradation) effect of the PV module precisely and efficiently.
Being equipped with the output ability of 2000 V and the ammeter with nA resolution as well as a polarity switching function, the TOS7210S is also applicable not only to the PID evaluation but also the evaluation of the insulators that requires a high sensitivity of measurement. The tester is equipped with the panel memory that is externally accessible and RS232C interface as standard; it can be flexibly compatible with the automated system.
[60A] Ground Bond Tester Supporting UL60950-1
While inheriting the basic performance and functions of its predecessor (TOS6200), such as a constant current driving system that provides current waveforms with little skew and high measurement accuracy, the TOS6210 tester extends the maximum test current from 30 A to 60 A, which is demanded by the new standard.
In addition, the tester also lets you judge the acceptability of the device under test based on the drop in voltage, as required in the standard. What’s more, you can preset test conditions of up to 20 different types of safety standards, such as those for information technology equipment, home appliances, medical devices, and measuring instruments, in the memory on the main unit’s panel.
A simple memory call operation allows you to set up a protective earthling or protective bonding continuity test as stipulated in UL60950-1 and other relevant specifications including IEC and JIS standards.
The tester also features a set of functions that meet the specific needs of testing personnel, such as an offset cancellation function and a memo function that allows you to input calibration dates, production numbers, and other test-related information and read the input information later via the GPIB or RS-232C interface.
[30A] Ground Bond Tester
The TOS6200A tester is designed to perform the ground bond tests required for class-I devices by safety standards such as IEC, EN, VDE, BS, UL, JIS, and the Electrical Appliance and Material Safety Low (Japan).
Equipped with a new high-efficiency power supply, it is compact and lightweight, about half the size and weight of our conventional products, while achieving a large output of 150 VA.
Use of the constant current method eliminates the need to reset test currents even in the face of fluctuating resistance values for the device being tested. The test duration can also be set from 0.3 s, making the tester suitable for production line testing, which requires reduced cycle time.
Leakage Current Tester
Battery Test System : 6 Models
All-in-one basic package to start battery test : 2 Models
Contents of the system
Capacitor Tester For EDLC (Electric Double Layer Capacitor) : 4 Models
Charge/Discharge System Controller
Digital Power Meter (5mA〜20A)
The digital power meter, KPM1000, is a measuring instrument that measures the single phase power applied to the extended range from the small consumption such as a standby power to the large scale consumption of power. Through the years, each region of the world has been putting their effort to establish the regulation related to the ecological design such as “ErP Directive” in Europe, “Energy Star” in the US, “Top Runner Method” in Japan, and those standards are widely used by commercial companies while taking advantage from other products as well as an effort to the environment issues. In the “ErP Directive Lot6”, it applies to the standby power consumption (classified in the “Off-mode” and “Standby mode”) of home appliances, and office equipments, and it is required to issue the declaration of conformity for the CE marking.
Digital Multimeter (6 1/2 digit) : 2 Models
50MHz Function Generator : 2 Models
High Voltage Digital Voltmeter (AC/DC 10kV)
Harmonic/Flicker Analyzer for IEC61000-3-2/3/11/12, IEC61000-4/7/15
KHA3000, in addition to the complied standards and features of the KHA1000 (dedicated for single phase), is equipped for the harmonic and flicker compliance test exceeding 16A of the single-phase and three-phase equipment. With this unit alone, you can take highly accurate simultaneous three-phase measurements up to 40A/phase*. Furthermore, the KHA series is compliant with two measurement technique standards, the existing and the latest versions, so you can simply select to take measurements for the latest standard including interharmonics and for the conventional integral multiple harmonics without using any other device.
Harmonic/Flicker Analyzer for IEC61000-3-2/3 : 2 Models
FC(Fuel Cell) Impedance Meter (up to 5A)
FC(Fuel Cell) Impedance Measurement System
The KFM2150 system is a fuel cell impedance measurement system configured with an FC impedance meter KFM2150 and an electronic load PLZ-4W series. Combination of KFM2150 and PLZ-4WA series (0V input type) supports impedance measurement for single cell of fuel cell.
In addition to impedance measurement with AC impedance method, KFM2150 system provides IR measurement with current interrupt method.
FC(Fuel Cell) Impedance Meter (up to 30A)
The impedance meter KFM2030 is intended to enable the impedance characteristics of a fuel cell to be measured easily through the use of the AC impedance measurement method.
Using the application software that comes with it, the meter can obtain impedance values at different frequencies by means of AC impedance measurement and display the obtained values in a Cole-Cole plot. With a low-power DC load (60 W) built in it, KFM2030 supports fuel cell load testing at up to 20 V, at up to 30 A.
FC(Fuel Cell) Scanner (32ch)
We are glad that you preferred to contact us. Please fill our short form