Power Electronics is the study of switching electronic circuits in order to control the flow of electrical energy. It is the art of converting electrical energy from one form to another in an efficient, clean, compact, and robust manner for convenient utilization.
Modern power electronic converters are involved in a very broad spectrum of applications like switched-mode power supplies, active power filters, electrical-machine-motion
Intelligent Bi-Polar Power Supplies (Switching/Series Regulated, CV/CC) : 14 Models
Outline
The PBZ series is a bipolar type DC regulated power source that can continuously change both + and – polarities passing through 0 without changing the output terminal.
By adopting a “Switching + Linear” system, the PBZ is able to realize both drastic weight reduction as well as high speed and low noise operation.
By adopting a “Switching + Linear” system, the PBZ is able to realize both drastic weight reduction as well as high speed and low noise operation.
Features
- Low ripple and noise (in CV mode)
- Waveform generation function
- Sequence function
- Synchronized operation function
High-Efficiency, High-Capacity Switching Power Supply (Switching system, CV/CC) : 97 Models
Outline
The PAT-T Series is a constant voltage/constant current, auto-shifting, switching DC power supply. It features a soft switching system that offers greater efficiency and lower noise. At the same time, it makes full use of high-density packaging technology to reduce the unit’s size and weight.
Features
- 4 kW type can operate even with single-phase 200 volt input. (However, current is limited to about 75% of rated value.)
- Standardly equipped with RS-232C interface.
- Supports USB/GPIB/LAN interface.(Factory option)
- Controllable from Excel VBA and LabView with measuring instrument driver. Driver can be downloaded free at our web site.
- Capacity can be expanded through parallel operation (up to five units of the same model).
- Equipped with reliable output ON/OFF delay function during sequence operations.
The PWR-01 is a series of high performance, multifunctional, compact, wide-range DC power supplies. It consists of 12 models in total with 4 maximum voltage outputs (L, ML, MH, and H) and 3 maximum power outputs (400 W, 800 W, and 1200 W). With the PWR-01 series you can set sequences with an embedded CPU as well as analog control. The series is equipped with LAN (LXI), USB, and RS232C as standard interfaces that are essential for system integration. The PWR-01 also features front-facing output terminals, variable internal resistance, bleeder ON/OFF functions, CC/CV priority switching function, synchronized operation, various protections, and programmable internal memory.
Features
- Sequence function (supports triggered synchronization)
- Variable internal resistance function
- LAN (LXI compliant) /USB/RS232C as standard interface
- A virtual multi-channel bus (VMCB) function makes multi-channel operation more efficient
- A wide range of voltage and current settings can be combined within its output power rating (3 to 4 times)
- All models are equipped with front-facing output terminals as standard (maximum 10A)
- Supporting universal input voltage (85V to 265V)
- CONFIG setting shortcut function and display (Up to three parameters can be registered.)
- Setting preset memory function (3 combinations of settings for voltage, current, OVP, OCP, and UVL)
- Bleeder (sink) can be turned on/off, with an even stronger bleeder mode setting available
- Output-on/off delay function
- Soft start/stop function
1U Multi Range Programmable DC Power Supply (Switching system, CV/CC) : 9 Models
Outline
The PWX series is a CVCC programmable regulated DC power supply designed to optimize for a rack-mounted power supply. To increase its mounting efficiency, it has a 19-inch rack width with a thin shape and intakes and outtakes for cooling on only the front and back surfaces so that it can be mounted flush top and bottom. The series is equipped standard with USB, RS-232C, and LAN interfaces, which are essential for system upgrades.
Features
- Performance and Functions
- Rated output power: 750 W/1500 W
- Rated output voltage: 30 V/80 V/230 V/650 V
- A wide range of voltage and current settings can be combined within its output power rating (3 times)
- PFC circuit of 0.99 (with 100 V) or 0.97 (with 200 V) at full load *TYP value
- Equipped with standard LAN interface and optional VMCB function to support network-based remote control and monitoring
- Basic configuration with LAN interface and VMCB (example)
- Easy access with the built-in web server
- Operating Range: 3 times output power rating
Click to view pdf!
Variable-switching Regulated DC Power Supply (Switching system, CV/CC) : 24 Models
Outline
The PAS Series consists of sophisticated variable-switching DC power supplies that refine and add to the advances of our conventional PAK-A Series. While the cabinet size remains unchanged from conventional models, the PAS Series incorporates a high-efficiency switching circuit and a power-factor correction circuit to meet the needs of today’s users.
Features
- Equipped with a power-factor correction circuit
- High power conversion efficiency of 75% (TYP.)
- Equipped with digital communication functions
- External analog control functions
- Analog read-back function
- Parallel and series operation
- Four-digit indication display unit
- Multifunction dial
- Supporting universal AC input
High Reliability DC Power Supply (Series regulated system, CV/CC) : 28 Models
Outline
The PAN-A Series is a high-performance, highly reliable DC power supply unit featuring regulated variable voltage. These units are suitable for use in a range of fields including research and development, quality control, and production. The PAN-A Series consists of a pre-regulator using FETs and a Series regulator using power transistors, providing the high-quality output characteristic of the latter as well as the low power-source harmonic distortion of choke input type phase control.
Features
- Low temperature drift
- Quick transient response
- Low ripple noise voltage
- Various safety functions
- GPIB control (optional function)
- External analog control
Compact DC Power Supply (CV/CC) : 9 Models
Outline
The PMX-A series is a compact, high-performance DC power supply that provides constant voltage (CV) and constant current (CC). It is designed to improve working efficiency for benchtop uses. For this purpose, the output terminals are located on the front panel and are ergonomically designed so that wiring harnesses for electrical loads can be connected by moving your fingers naturally. Moreover, a forced air cooling system is used to intake and exhaust of the internal air, so the unit can be rack mounted without space.
Features
A standard feature of the networking capability provides extended applications of the ordinary testing.
- Series regulator system with excellent noise performance
- High setting resolution – Voltage: 1 mV, Current: 0.1 mA (PMX18-2A)
- Wide range of output variations (9 models are available)
- LAN (LXI compliant) / USB / RS232C as standard interface
- External analog remote control
- Monitoring and status signal output
- CV, CC priority start function (to prevent overshoot when the output is ON)
Multi Channel Tracking DC Power Supply (Series regulated system, CV/CC) : 3 Models
Outline
The small-size PMP Series is a DC power supply that supports simple functions and provides constant multi-output voltage (CV) and current (CC). The past multi-output power supply can provide only two types of concurrently variable output. The PMP Series, however, implements “Multi-channel Tracking” that allows all types of output to be varied concurrently.
Features
- All the types of output have positive polarity*, and the output capacity (current rating) is enhanced.
- The supported multi-channel tracking function allows all output to be varied concurrently in the same ratio or width (absolute value).
- The available delay function has the ability to change timing at which to turn on or off the output.
- The supported memory function has the capability to store output settings. (This product has three memories.)
- Voltage and current can be displayed under high resolution of four digits.
Dual-Tracking DC Power Supply (Series regulated system, CV) : 2 Models
Outline
The PMM Series is a multi-output, constant voltage regulated DC power supply with a dual-tracking function. Each model can vary (tracking) output 1 and output 2 simultaneously. It uses a series regulator system to generate stable outputs with low noise. It can be widely used as a power supply for testing transistor, IC circuit, LCD, and other devices.
Features
- Dual-tracking function capable of varying positive and negative voltages simultaneously.
- Series operation can be done to increase the output voltage by combining each output.
- High resolution voltage/current display (green LED meter).
- Output ON/OFF by external contact.
- Overvoltage protection function (OVP).
- Remote sensing function to stabilize the output voltage across the load.
View PDF
3CH Precision DC Source (Series regulated system, CV)
Outline
KDS6-0.2TR is designed for use on production and inspection lines for high-frequency components capable of low supply current and low voltage operation that have become dominantly popular in recent years, as well as for a variety of electronic devices such as ICs, LSIs, and sensors.
This product is a low-noise, highly stable DC voltage power supply with 3-channel output.
This product is a low-noise, highly stable DC voltage power supply with 3-channel output.
Features
- 3-channel voltage standard
CH1: 0 to +6 V/200 mA
CH2: 0 to +6 V/30 mA
CH3: 0 to +6 V/30 mA (COM of 3-channel in common) - Remote sensing function that compensates for voltage drops at the output terminal
- Best suited to operation tests for VCO and many other types of sensors
- Voltage setting resolution of 100 µV (allows a different voltage to be set independently for each channel)
- Current reading resolution of 0.1 µA* (in standard mode)
* 1 µA resolution for the 200 mA - Ripple noise level lower than 100 µVrms, thus supporting measurements of high-sensitivity devices
View PDF
The PAV series is a compact, high power density, high performance constant voltage (CV) / constant current (CC) variable switching power supply. The PAV consists of 64 models total*1 with 4 types of maximum power outputs at 200 W, 400 W, 600 W and 800 W and output voltages from 10 V through 650 V. All models are standardized to a same size with 2U high (approximately 88 mm) and have high power density for bench-top use. The PAV series allows sequence settings with an embedded CPU as well as analog control.
Parallel operation (up to 6 units)*2 and synchronized operation features are employed to allow extended output current. The PAV series is equipped standard with USB, RS232C and RS485 as communication interfaces which are essential for system upgrades. LAN*3 interface is also available as an option. A harmonic current control circuit is embedded with a power factor of 0.99 to take power environment into account.
*1 LAN model included (with LAN)
*2 The PAV series with the same rating
*3 factory option
Features
- Ultra-compact high power:19 inch rack-mount (max 6 units) 200 W / 400 W / 600 W / 800 W models available.* LAN*, USB, RS232C, and RS485 as standard communication interfaces. *LAN is a factory option
- A variable power supply system of up to 31 channels can be configured using the built-in LAN / USB / RS232 / RS485 ports.
- Parallel operation is possible using several PAV series power supplies with the same voltage and current ratings (up to six using master-slave parallel connection with output current balance function).
High-performance multifunctional AC Power Supplies (CV/CF) : 7 Models
Outline
The PCR-LE Series is a new line of advanced multifunctional AC power supply that has been developed from our PCR-L/LA Series (linear amplifier type). The PCR-LE Series provides high reliability and can be applied to various applications, by taking advantage of the features that can control broadband waveform freely. Moreover, the PCR-LE Series can be configured as a core device of a test system combined with E-loads and Power Analyzers for “Grid Connection Testing” in regard to dispersed power generation, such as Solar Power, Wind Power, Fuel Cell, and Gas Engine referred to as “New Energy Field”.
Features
- Wide-ranging specs DC output also supported
- Selectable response mode
- Power line abnormality simulation
- Various measuring functions
- Sequence function
Multi-output AC Power Supplies (CV/CF) : 5 Models
Outline
The PCR-LE2 Series are designed based on the PCR-LE Series that supports single-phase output, single-phase 3-wire output, and three-phase output within the rated capacity by selecting the switch from the front panel operation.
The PCR-LE2 series offer the same basic performance, using the common power unit of the PCR-LE Series, with providing easier installation and saving the space more efficiently compare to the individual allocation of the system for a single phase, single-phase 3-wire, and three phase systems. The lineup of PCR-LE2 Series are available in 5 models:6 kVA, 9 kVA, 12kVA, 18kVA, and 27 kVA model.
The PCR-LE2 series offer the same basic performance, using the common power unit of the PCR-LE Series, with providing easier installation and saving the space more efficiently compare to the individual allocation of the system for a single phase, single-phase 3-wire, and three phase systems. The lineup of PCR-LE2 Series are available in 5 models:6 kVA, 9 kVA, 12kVA, 18kVA, and 27 kVA model.
Features
- Wide-ranging specs DC output also supported
- Selectable response mode
- Power line abnormality simulation
- Various measuring functions
Compact AC Power Supplies (CV/CF) : 4 Models
Outline
The PCR-M Series is a small-size AC power supply with the ease of a variable auto transformer or an automatic voltage regulator (AVR) and the usefulness of a multifunctional AC power supply. As the PWM inverter method is adopted for the power unit, the PCR-M Series is much smaller and lighter than the predecessors while enabling high-quality and highly-efficient (about 70%) operation. This power supply comes with measurement functions, memory function, protection functions and various communication interface options, and it is even possible to provide DC power. When you incorporate an optional analog interface board (EXO4-PCR-M), the PCR-M Series can also be used as a booster for arbitrary signal generator. This small and versatile unit can provide you with more work styles than you can imagine. You can’t do without it once you use it!
Features
- Compact design
Small enough to fit on your work desk ! - Versatile output modes Three modes (AC, DC, AC+DC) are available.
The frequency range is up to 500 Hz. - Memory function
You can store and recall three combinations of settings for voltage and frequency on the main unit. By calling the memory during output, you can test the sudden changes of voltage or frequency. - Measurement functions
You can measure the voltage, current and power of AC and DC output, apparent power, reactive power, power factor, crest facter and current peak hold.*3 - Various communication interface options
RS-232C is provided as standard. GPIB and USB are optional. - Analog interface
By incorporating an optional analog interface (EXO4-PCR-M), output can be controlled by using external analog signals. Input DC signals can be used to change output AC voltage and boost input waveform. - Control using a PC
You can control the PCR-M Series through the standard RS-232C interface, the optional GPIB interface, or the optional USB interface.
Click to view PDF!
High Efficiency AC Power Supplies (CV/CF) : 6 Models
Outline
With a primary development concept of improved efficiency and low cost, the PCR-W/W2-Series, regulated AC power supply, features a balance of performance, function, quality, and cost based on the technology and know-how established with the PCR-L Series of products. Specifically, PWM inverter system was used for the power unit, providing the power supply with improved efficiency (by approximately 75 %), low-input current demand, and a considerably downsized and lightweight package design. The PCR-W/W2-Series power supply features a wide input range and high-quality, powerful output (as well as a reduction in low-waveform distortion, and the provision of high response speed and low power-factor load) for worldwide application, and is equipped not only with measurement and output capabilities for AC parameters such as RMS value, peak value, power, and power factor, but also with DC output and AC+DC output modes. With these features, the capabilities of the PCR-W/W2-Series power supply go beyond ordinary AC power supply, providing greater convenience.
Moreover, with one unit of the PCR-W2-Series product, utilization of both single-phase and three-phase outputs of the same capacity is possible simply by changing the position of the selector switch. This enables the user to eliminate installation of individual single-phase and three-phase systems as had previously been necessary, thus enabling the budget and space to be utilized more efficiently.
Moreover, with one unit of the PCR-W2-Series product, utilization of both single-phase and three-phase outputs of the same capacity is possible simply by changing the position of the selector switch. This enables the user to eliminate installation of individual single-phase and three-phase systems as had previously been necessary, thus enabling the budget and space to be utilized more efficiently.
Features
- Low Noise and High Speed
High quality output like that of the linear amplifier system has been achieved: voltage waveform distortion less than 0.5%, voltage response speed of 60 µ s (standard value). - Measuring Function
Output voltage/current real effective value, peak value, DC mean value, and electric power are displayed on the panel. Using optional accessories, power factor, VA measurement and peak hold current measurement are also possible. - For Automatic Production Lines
Applicable to GPIB or RS-232C control. The PCR-W Series can be used in automatic production and inspection lines. It is equipped with a voltage-drop sensor, and regulation adjustment functions.
Click to view pdf!
Multifunctional DC Electronic Load (CC/CV/CR/CP/Zero volt input) : 6 Models
Outline
The PLZ-4W Series Electronic Load unit is a multifunctional system designed to offer the highest levels of reliability and safety with operation function of constant voltage, constant current, constant power and constant resistance mode. And its control unit comes with GPIB, RS232C and USB as standard equipment, available in 5 models.
A 0(Zero)V input operating voltage is available in 2 models (PLZ164WA, PLZ664WA) which are suitable to meet the testing demands for the Fuel Cell, DC/DC converter, SW Power Supply, and any other devices required for the lower operating voltage application. Model PLZ664WA offers the 132A at 0V input as a largest current rating in its class. ( 33A for model PLZ164WA)
Furthermore, the PLZ-4W features high speed slew rate when switching, it can be used as simulating load for the characteristic, performance, life cycle, aging test in the field of application in Automobile electronics, SW Power Supply manufacturer, Secondary Battery.
A 0(Zero)V input operating voltage is available in 2 models (PLZ164WA, PLZ664WA) which are suitable to meet the testing demands for the Fuel Cell, DC/DC converter, SW Power Supply, and any other devices required for the lower operating voltage application. Model PLZ664WA offers the 132A at 0V input as a largest current rating in its class. ( 33A for model PLZ164WA)
Furthermore, the PLZ-4W features high speed slew rate when switching, it can be used as simulating load for the characteristic, performance, life cycle, aging test in the field of application in Automobile electronics, SW Power Supply manufacturer, Secondary Battery.
Features
- High-speed response and variable slew-rate
With PLZ-4W series, a faster response of rise/fall time as calculated conversion value with 10 µs is made possible, enabling a transient response test for the direct current and accurate reproduction of a simulation waveform as a dummy load. In addition, it also can be set with a slew rate (A/µs ). As for the setting value, it can be varied continuously, and be possible to optimize transient control for voltage drops due to wiring inductance, constant-voltage power supply, etc., when the load current is switched on. - 0(Zero)V input
The 164WA and 664WA of PLZ-4W series permit a load input up to the rated current even when the Input Voltage is set for 0(Zero)V. - Sequence function
Sequence patterns set as you requested can be saved in the built-in memory. In the sequence program, 10 normal sequences and 1 first sequence can be saved. 256 steps of normal sequences, and 1024 steps of the first sequence can be saved in each program. - Convenient function for discharging test of cells
The PLZ4W can measure the time from load-on to load-off. When combined with under voltage protection (UVP) function, the time from when the battery discharge is started until the battery voltage falls to the cutoff voltage can be measured. Also, you can set the timer so it will load-off automatically after a specified time elapses from load-on mode. Once this timer is set, the input voltage value immediately before load-off is displayed, so it is possible to measure the closed circuit voltage after a specified time elapses from the start of discharging battery. - Booster unit PLZ2004WB
To achieve a large capacity system at low cost, the PLZ1004W has an expandable option PLZ2004WB as a booster unit. Using 1 PLZ1004W as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 1800A) Note: PLZ2004WB(Booster unit) can be used for the PLZ1004W only. It cannot be connected and used with any other model. - Parallel operation
Under parallel operation, the same model can be parallel connected to a maximum of 5 units when booster unit is not used. (Max. 5kW, 1000A) - Various Functions
The PLZ-4W Series has equipped with all the same functions of its former type of the PLZ-3W Series, such as the Soft-start Function, Lock Function, Short Function, ABC Memory Function, Set-up Memory Function, Switching Functions, etc. - GPIB, RS-232C, USB as standard equipmen
Click to view PDF!
High Speed-Large Current DC Electronic Load (CC/CV/CR/CP) : 2 Models
Outline
While the PLZ-4WL series succeeds to the superior operability of our conventional model of the PLZ-4W series, the PLZ-4WL series realizes the high speed rise and fall time (slew rate of 50A/µs.) in the range of low voltage with large current.
The PLZ-4WL offers six operation modes, and equips with various features such as sequence operation, switching operation, soft-start function, and time and voltage measurement.
The PLZ-4WL applies not only for the conventional load test of the CPU power supply, but also it can be applied to even faster current response test. In addition, the PLZ-4WL is a space-saving design (about 50% less volume of the conventional model) that can save the facility space of the testing site, and it can be applied for the single cell testing of the large scale rechargeable battery.
The PLZ-4WL offers six operation modes, and equips with various features such as sequence operation, switching operation, soft-start function, and time and voltage measurement.
The PLZ-4WL applies not only for the conventional load test of the CPU power supply, but also it can be applied to even faster current response test. In addition, the PLZ-4WL is a space-saving design (about 50% less volume of the conventional model) that can save the facility space of the testing site, and it can be applied for the single cell testing of the large scale rechargeable battery.
Features
- Applications
– Test for the Low Voltage Power Supply of the CPU
– Discharge test for the large current rechargeable battery
– IV characteristic test of the solar battery
– Impedance test for the various type of rechargeable batteries, power supplies
– Test for the relays, switches
– Absorbing the surge of brushless motor
– Test for the prearcing time-current characteristic - Realizing the low voltage operation
Possible to operate as low as 50mV by the input voltage. Even below the input voltage of 0.3V, this product can be used by reducing the current. - Accurate low-rate discharge by the Low-range (1/100)
Each operation mode of the CC, CR, and CP has 3 ranges (H, M, L). The “L “range employs the scale of 1/100 which covers the range from the small to the large scale of the current. - Fast Slew rate
Realize the slew rate of 50A/µs at 2.3V of the load input terminal voltage - Convenient feature for the discharge testing
The Auto load-off timer and the Cut-off features can be applied to the discharge capacitance measurement of the rechargeable battery - Operation mode
Applied to the 6 operating modes (Constant Current, Constant Resistance, Constant Voltage, Constant Power, Constant Current + Constant Voltage, Constant Resistance + Constant Voltage) - Sequence function
The sequence mode can be set in 2 operation modes (Normal and Fast mode). The Fast mode can be set for the minimum step time of 25µs, and it can be synchronized with the external device by using the trigger input/output feature. - External analog control
Not only the external control for the CC, CR, CP, and CV, but also it is capable to superimpose the current by the external input current on the present value of the CC setting. Moreover, it also can turn the LOAD ON/OFF.
Click to view Pdf!
Multifunctional High Voltage DC Electronic Load (CC/CV/CR/CP) : 4 Models
Outline
The PLZ-4WH Series Electronic Load is a multifunctional system designed to offer the highest levels of reliability and safety. The electronic load contains a stable and high performance current-control circuit that enables high-speed load simulations with maximum operating voltage of 650V. In addition, its CPU control feature works to improve operability and multifunctional capability. The high-precision current settings provide you with sufficient resolution. The PLZ4WH comes standard with GPIB, RS232C, and USB communication functions, that can be easily incorporated into a wide range of test and inspection systems.
Features
- Extended operating range !
- Expandable system up to 9 kW / 450A by connecting booster units (exclusively used for Model PLZ1004WH)
- 3 ranges of setting resolution equipped with L range (1/100)
- Voltage Monitor terminal for monitoring high-voltage
- In addition to CC, CR mode 5 levels of response setting for CV mode
- Sequence function
Capable of program up to 1024 steps - Optional software Wavy makes your operation easier
The application software supporting the sequence operation (option)
Click to view PDF!
6kW Regenerative DC Electronic Load (CC/CR/CV/CP/CC+CV/CR+CV)
Outline
PLZ6000R is a DC electronic load that regenerates load power to the AC line. Regular electronic loads consume load power by having semiconductor devices convert it into heat. By contrast, PLZ6000R converts load power into reusable electric power, rather than converting it into heat as is typically done, and feeds this power to the AC line, thereby substantially reducing the amount of waste energy. PLZ6000R is an environment-friendly electronic load that can contribute significantly to your energy saving efforts.
Features
- Power regeneration efficiency of up to 90% (at rated power)
The use of a proprietary switching technology (patent pending) provides high power regeneration efficiency – from 85% or more at one-third of rated power (2000 W) to a maximum of 90% or more. This energy saving feature greatly reduces the electronic load’s environment impact on your plant and it is not necessary to equip special cooling system such as water cooling method to supress the heat generation. - No necessity of special cooling system such as water cooling method
Please view the movie about comparison with conventional E-load. The movie will help your understanding about effect of PLZ6000R. - Aging and evaluation testing for DC/DC converters and various types of power supplies
- Evaluation and durability testing for alternators and motor generators
- Discharge testing for different types of batteries (lead, lithium, and assembled batteries)
- Dummy load testing for equipment powered by natural energy (solar cells and wind power generation)
- Evaluation testing for fuel cells and stacks
Click to view pdf!
Modular Multifunction DC Electronic Load (CC/CV/CR/Zero volt input) : 4 Models
Outline
The current trend in semiconductors is towards lower voltages and higher speeds. This trend places similar demands on both the components of semiconductor power units, such as switching power supplies, batteries and DC/DC converters, and also on the electronic loads used for testing. Also, a growing number of users with a need for multiple-output power units and easy channel reconfiguration are calling for plug-in type electronic loads that can be easily configured to support multiple channels. The advent of an electronic load system that satisfies all these needs has been long awaited. It was against this background that we developed the PLZ-U Series of electronic loads.
The PLZ-U Series of compact and high-performance modular electronic loads is capable of operating in five modes: constant current, constant resistance, constant voltage, constant current + constant voltage, and constant resistance + constant voltage. The load system consists of load modules and a frame. The load modules are inserted into the frame that also serves as a control unit. The PLZ-30F frame can accommodate up to three load modules, while the PLZ-50F frame can accommodate up to five. The load modules can be operated in parallel, so that the current capacity or power capacity can be changed easily, from 75 to 750 watts*1, as needed for the device under test. In addition to offering high-speed response at a maximum slew rate of 2.4 A/ µs*2 and a minimum setting resolution of 10 µ A*3, the system features a variety of functions including soft start, variable slew rate, a switching function, ABC preset memory function, four setup memories, and a sequence function. What’s more, timer functions combined with time/voltage measurement functions allow you to measure battery discharge characteristics.
For communication, the system is provided with GPIB and RS-232C interfaces as standard. Both interfaces support IEEE 488.2 as well as the Standard Commands for Programmable Instruments (SCPI) commands, developed for testing and measuring instruments.
The PLZ-U Series of compact and high-performance modular electronic loads is capable of operating in five modes: constant current, constant resistance, constant voltage, constant current + constant voltage, and constant resistance + constant voltage. The load system consists of load modules and a frame. The load modules are inserted into the frame that also serves as a control unit. The PLZ-30F frame can accommodate up to three load modules, while the PLZ-50F frame can accommodate up to five. The load modules can be operated in parallel, so that the current capacity or power capacity can be changed easily, from 75 to 750 watts*1, as needed for the device under test. In addition to offering high-speed response at a maximum slew rate of 2.4 A/ µs*2 and a minimum setting resolution of 10 µ A*3, the system features a variety of functions including soft start, variable slew rate, a switching function, ABC preset memory function, four setup memories, and a sequence function. What’s more, timer functions combined with time/voltage measurement functions allow you to measure battery discharge characteristics.
For communication, the system is provided with GPIB and RS-232C interfaces as standard. Both interfaces support IEEE 488.2 as well as the Standard Commands for Programmable Instruments (SCPI) commands, developed for testing and measuring instruments.
*1 When five PLZ150U units are installed in a PLZ-50F frame
*2 For the PLZ150U
*3 For the PLZ70UA
Features
- Compact, lightweight body
The electronic load system is as wide as a 19-inch rack with a height of 3U. Weighing about 11 kg when configured for three channels or about 17 kg when configured for five channels, the system is compact, lightweight and space-saving. - High-speed response
In constant current mode, the electronic load is capable of offering high-speed response at a slew rate of 2.4 A/µ s at the rising and falling edges of the current (equivalent to about 10 µ s when converted to the rise and fall times; in the case of PLZ150U). - High precision and high resolution
The built-in three-range configuration provides both wide dynamic range and high precision. The voltmeter, ammeter and wattmeter functions that display values using up to five digits each and a minimum setting resolution of either 10 µA (PLZ70UA) or 20 µA (PLZ150U) are implemented. - Variable slew rate
In constant current or constant resistance mode, the slew rate can be changed continuously. - 0(Zero)V input
The PLZ70UA model operates even when the input operating voltage is 0(Zero)V. - Multi-channel system
PLZ-50F may be configured with up to five channels, and PLZ-30F may be configured with up to three channels. Isolated from each other, the channels can operate both independently and in synchronization. Different models of load units (PLZ150U and PLZ70UA) can be housed in a single frame.
Click to view pdf!
AC Electronic Load (CC/CR/CP)
Outline
PCZ1000A is an AC electronic load that enables you to perform load simulation for various inverters and transformers. In addition to the resistive loads generally used in tests, it is capable of simulating capacitor-input rectifier loads.
The instrument supports input up to 1000W and is equipped with 3 operation modes – Constant Current, Constant Resistance, and Constant Power.Current waveform resemble to sine wave can be output constantly without effect by voltage waveform at each mode. Moreover, the instrument is equipped with Crest Factor function that is suitable for simulating current load test for switching power supply.
This instrument provides improved operation through CPU control and enables external control and read-back via RS-232C.
The instrument supports input up to 1000W and is equipped with 3 operation modes – Constant Current, Constant Resistance, and Constant Power.Current waveform resemble to sine wave can be output constantly without effect by voltage waveform at each mode. Moreover, the instrument is equipped with Crest Factor function that is suitable for simulating current load test for switching power supply.
This instrument provides improved operation through CPU control and enables external control and read-back via RS-232C.
Features
- Maximum input load power: 1000W
- Input voltage range: 14V to 280V(rms)
- Input current range: 0 to 10A(rms)
- Input frequency range: 45 to 65Hz
- Parallel operation expands the load capacity
Up to 5 units can be operated in parallel (Max. 5kW, 50Arms) - Supports single-phase 3-wire method, 3-phase 3-wire method
Equipped with tracking operation function - Crest Factor Function [1.4 to 4.0]
Facilitating load tests for peak or harmonic currents helps reduce design and labor time and cost as well as improve the quality of the unit under test
Click to view pdf!
The PLZ-5W Series high performance electronic load is the successor to the highly respected PLZ-4W series, whilst still retaining the same high specification and build quality. Advances include a high visibility color display, low voltage operation from a minimum of 1 V to a maximum of 150 V. Programmable profiles of voltage/current can be applied (using the new ARB function, as used in LED/solar testing) in addition to the inherited 6 modes of operation: Constant Current, Constant Resistance, Constant Voltage, Constant Power, Constant Current + Constant Voltage, Constant Resistance + Constant Voltage.
Features
- Color liquid crystal display (LCD)
- Maximum Slew Rate of 60 A/μs
- High speed voltage tracking characteristics
- Communication interfaces are included as standard
- Multiple units of the same type can be connected in parallel. Without using boosters, you can connect up to five units of the same model in parallel, including the master unit (max. 6 kW, 1200 A)
Click to view pdf!
Power Supply Controller with USB
Outline
The PIA4850 is a power supply controller with USB interface to control Kikusui DC power supply with TP-BUS. PAS Series, PWR Series or other models that equips TP-BUS can be digitaly controled by PC, as well as for read-back of output values and status monitoring. It operates using bus power and with its simple system and compact structure, you can use whenever you need with easy setup.
Features
- USB 2.0 compatible
- Can be used with Windows Vista/XP/2000.
- Operates using bus power. Requires no AC adapter.
- Bus power operation. No AC adapter required.
- Allows read-back of output values and status monitoring.
- Can control up to 32(*1) DC power supplies that equip TP-BUS(*2).
(Different power supply models can be combined.)
TP-BUS connection can be extended up to 200 m. Ideal for remote monitoring !
Click to view pdf!
Power Supply Controller Supporting Multiple Channels : 5 Models
Outline
The PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled.
Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PAS, PAM(*1) and PMR Series, can be directly connected to the PIA4830 via a TP-BUS (twisted pair bus), enabling a system up to 32 channels to be controlled digitally.
Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PAS, PAM(*1) and PMR Series, can be directly connected to the PIA4830 via a TP-BUS (twisted pair bus), enabling a system up to 32 channels to be controlled digitally.
ADDRESS
Keith Electronics Pvt. Ltd., 429, Ansal Chambers-II, 6, Bhikaji Cama Place, New Delhi-110066
Toll Free No: 1800-1020-429
Ph: 011-26169380, 26178510, 26177414