The Fujikura 80C is a fully robust, core alignment fusion splicer, providing consistent, low loss, splice performance.
The new design streamlines the steps required to complete splices, resulting in greater productivity. ‘Configurable automation’ features allow you to customise the operation of the machine to best suit your particular splicing technique and process.
A new programmable ‘automatic wind protector’ closes and begins the splicing process after clamping the fibres in position or pressing the ‘set’ button. Once the splice is completed, not only is the wind protector opened, but one of the sheath clamps, you decide which, is automatically raised making removal of the fibres fast and easy!
• Automated and programmable wind protector
• 9-second automated tube heater
• Fully robust for shock, dust and moisture
• Li-Ion battery with 200 splices/shrinks per charge
• 5 mm cleave length for splice on connector or small package needs
• Sheath clamp or fibre holder operation
• On-board training and support videos
• Internet software upgrades
• Multi-function transit case with integrated workstation
The Fujikura 62C provides active core alignment splice loss performance while utilizing a conventional wind protector and tube heater design. An alternative to the fully automated core-alignment model 70S, the 62S includes an auto-start feature for both the splicing and tube heating process that minimizes the steps necessary to process splices. With a shrink time of 23 seconds with standard splice sleeves, the 62C ensures a high level of productivity. Incorporating the proven ruggedised features pioneered by Fujikura, durability is greatly enhanced by a mirrorless optical system and “severeimpact resistant” monitor. Battery capacity is 200 splices/shrinks. The transit case doubles as a built-in or mobile workstation and makes splicing easier than ever.
The 22s is designed for high-end FTTH splicer applications in FTTX, Data Center / LAN and Access Networks.
22s offers an active V-Groove alignment single fibre splicer for reliable and improved splicing performance for a range of different fibres; SMF, MMF, DSF, NZDSF.
Applicable from 125μm cladding diameter/up to 3mm sheath diameter fibres with sheath clamp.
22s provides advanced capabilities; including splice result storage of 200 splices, 5-16mm short cleave length splicing .
Quick splicing time is produced in 9 seconds (single mode fibre) and an automated tube-heating time of 30 seconds (single mode 60mm).
The Fujikura 70R is a fully ruggedized fusion splicer for ribbon optical fiber. The new design streamlines the steps required to complete splices, resulting in greater productivity. “Configurable automation” features allow you to customize the operation of the machine to best suit your particular splicing technique and process. A new programmable “automatic wind protector” closes and begins the splicing process after clamping the fibers in position or pressing the “set” button. Once the splice is completed the wind protector is automatically opened making removal of the fibers fast and easy! Similarly, the “clamshell” design of the tube heater clamps the splice splice protection sleeve and applies heat from both sides which results in a reduced shrink time of just 40 seconds.
Fujikura’s specialty splicers, FSM-100M and FSM-100P are able to splice various types of specialty fibers such as photonic crystal fibers, (PCF) holey structured fibers and conventional silica large diameter fibers (LDF) up to 500 micron clad diameter using patented ‘Split V-groove’ fiber clamping system. With a new fiber imaging technology, Interrelation Profile Alignment (IPA), alignment and splicing capabilities are possible with virtually any PM fiber type.